|
| Quick Specification |
| Paper entry width: 58mm |
| Printing width: 48mm |
| Paper thickness(μm): 60~80μm |
| Printing speed: 80mm/s and 130mm/s |
| Reliability: 100KM |
|
|
|
- 2-inch thermal printer module
-
This thermal printer module, with tear bar for paper cutting, has plug and play capability, which greatly reduces the time-to-market. Characterized by high speed, little noise, and high reliability, it is widely used in measuring devices, medical equipments, etc.
Application:
1. Protable printers and terminals
2. Hand held ternimals
3. Measuring instruments and analyzers
4. Data terminal devices
5. Medical equipments
6. Taximeters
-
Unique Functions:
1. World's smallest 57mm*Φ50 thermal printer module
2. Used as panel printer when fixed on an iron plate, and used as an embedded printer when embedded in other devices.
3. With software command to enter standby mode, and ultra low standby current (6.0mA), which is very applicable to the devices with battery.
4. To control the number of dots and the interval of heating by the software command, and allocate the peak current
5. SAM connector space in side each is applicable for SD or SAM card(customizable).
Functions:
1. Support Windows/Linux driver
2. High printing endurance up to 100km(by using F230AA Mitsubishi paper, DJ03 or equivalent thermal paper)
3. High printing speed up to 80mm/s (at 8.5V)
| Model |
EM1LX |
EM1HX |
| Printing |
Printing method |
Thermal dot printing |
| Number of dots |
384dots/line |
288dots/line |
| Resolution |
8dots/mm(203dpi) |
| Paper entry width (mm) |
58mm(paper width 57±0.5mm) |
| Valid Printing width (mm) |
48mm |
48±0.2mm |
| Paper roll diameter(mm) |
φ50mm Max |
| Paper thickness(μm) |
60-80μm |
| Max printing speed |
80mm/s |
130mm/s |
| Paper loading |
Easy loading |
| Detection |
Paper end/black mark sensor |
By photo interrupter |
| Head temperature |
By NTC thermistor 30KΩ(25℃) |
| Operating voltage |
For printer head |
4.2V~8.5V |
24V |
| For motor |
4.2V~8.5V |
24V |
| For logic |
3.3V~5V |
3.3V~5V |
| Peak current |
Head |
3.09A(at 8.5V,64dots) |
2.36A(at 24V,64dots) |
4.64A(at 8.5V,96dots) |
3.54A(at 24V,96dots) |
| Motor |
0.6A |
1A |
| Character |
Character set |
1 resident |
| Character size |
12*24 |
| Character perline(max) |
32 max |
| Font |
Normal,Double width & height,white/black reverse,upside-down,bold |
| Instruction set: |
ESC/POS |
| Graphics |
variable width and offset, double width and height |
| Barcodes |
11 barcodes, normal and rotated 90° |
| UPC-A,UPC-E EAN8,EAN13,CODE39,125,CODABAR,CODE128,CODE11,MSI,CODE93 |
| Windeows drivers |
Windows/Linux |
| Interface |
RS232C,RS232TTL,USB(under developing) |
| Life |
Abrasion resistance |
100KM(Mitsubishi F230AA) |
| Pulse activation |
100 million |
| Operating Environment |
Operating temperature |
0-50℃ |
| Operating humidity |
10~90%RH (No condensation) |
| Storage temperature |
-20~60℃ |
| Storage humidity |
5~95%RH (No condensation) |
| Physical Characteristics |
Dimension |
76.6*80.9*54.8mm(with key button)76.6*73.6*54.8mm(without key button) |
| Weight(g) |
82g±15g |
|
|
EM1X Series Thermal Printer Module
